JOJUN MOHLAHISI OA SEBELISA OA THERMAL TECHNOLOGY
Tsepamisa maikutlo ho qhala ha mocheso, ho thibela mocheso, tlhahiso ea thepa ea ho thibela mocheso ka lilemo tse 15
- tiger.lei@jojun.net
- Mohala oa tšebeletso ea VIP oa lihora tse 24:+86 13656269868
Pad ea Thermal ea JOJUN-6X50 Series
Tlhaloso e Khutšoanyane:
JOJUN-6X50 Series Thermal Pad 15W/MK Heat Dissipation Motherboard Silicone Grease Pad CPU GPU Graphics Video Card Non-Conductive Thermal Pad E ipapisitse le thepa ea aluminium nitride ea AIN, foromo ea ho tsamaisa mocheso e ikhethileng. Litšobotsi tsa nitride ea aluminium ea AIN: ho kenya mocheso ka motlakase, ho tsamaisa mocheso ka mocheso o phahameng. Pula e tlase le karohano e tlase ea oli. Ho tšoarella haholo. Moralo o bonolo oa ho bula oa sephutheloana, o potlakile ho sebelisoa. Mefuta e fapaneng ea botenya e fumaneha ho latela litlhoko tsa hau. 1.0mm/1.5mm/2.0mm ke khetho. E sebelisoa haholo libotong tsa bo-mme tsa khomphutha, li-chip tse kopantsoeng, likarete tsa litšoantšo, li-drive tsa boemo bo tiileng, jj.
★ Matlotlo a Tloaelehileng a JOJUN-6X50 Series Thermal Pad
| Matlotlo a Tloaelehileng a JOJUN6X50 | |||
| Thepa | Yuniti | Letoto la Lihlahisoa | Mokhoa oa Teko |
| JOJUN6X50 | |||
| 'Mala |
| Ce tloaelehileng | Pono |
| Botenya | mm | 1.0-5 | ASTM D374 |
| E khethehilengMatla a khoheli | g/cc | 3.3 | ASTM D792 |
| Bothata | Lebōpong leo | 20-70 | ASTM D2240 |
| KopoThempereichara | ℃ | -50 - +200 |
|
| Ho chaSehlopha |
| V0 | UL94 |
| ThermalHo khanna motlakase | W/mK | 15 | ASTM D5470 |
| TšenyehoPalo ea li-volts | KV/mm | >6 | ASTM D149 |
| MolumoHo hanyetsa | ohm-cm | 10 ^14 | ASTM D257 |
| DielectricKamehla | 1MHz | 7 | ASTM D150 |
★ Kopo
CPU
Likarolo tse pholisang ho chassis ea foreimi
Li-drive tsa polokelo ea bongata tse potlakileng haholo
Ho tsamaea ka GPS le lisebelisoa tse ling tse nkehang habobebe
Mabone a TV a LED le a bonesitsoeng ke LED
Li-module tsa memori tsa RDRAM
Litharollo tsa mocheso oa phaephe e nyane ea mocheso
Litharollo tsa mocheso oa phaephe ea mocheso
Lisebelisoa tsa puisano
Lisebelisoa tsa elektroniki tse nkehang habobebe tse tšoaroang ka letsoho
Lisebelisoa tsa liteko tse iketsang tsa semiconductor (ATE)
★ Ts'ebetso ea Tlhahiso
Kopanya Hlohlelletsa
Ho ntša
Mohala oa Tlhahiso ea Thermal Pad
Sejalo
Sephutheloana
Thepa e Tsoang
★ Setsi sa R&D
Teko ea ho Senyeha ha Motlakase
Teko ea ho khanna mocheso
Sekoahelo sa ho knea
Laboratori
★ Likarolo le Melemo
Ho latela melao ea RoHS
UL e ananeloa
Motlakase o motle oa mocheso: 15.0 W/mK
Ka tlhaho e thata ha e hloke ho koaheloa ho eketsehileng ha sekhomaretsi
Tshebetso e ikhethang ea mocheso
E fumaneha ka botenya bo fapaneng
Kaho e bonolo ea ho lokolla
★ Lisetifikeiti
Likarolo tsa Lihlahisoa tsa Thermal
-
Likarolo tsa Thermal Pad
1. Ho tsamaisa mocheso hantle: 1-15 W/mK.
2. Bothata bo tlase: Bothata bo tloha ho Shoer00 10 ~ 80.
3. Ho sireletsa mocheso ka motlakase.
4. Ho bonolo ho e kopanya. -
Likarolo tsa Thermal Paste
1. Sekoahelo sa ho tlatsa sekheo se ka aroloang ka likarolo tse peli, sekhomaretsi sa metsi.
2. Ho tsamaisa mocheso: 1.2 ~ 4.0 W/mK
3. Ho thibela motlakase o phahameng, khatello e phahameng, ho hanyetsa mocheso hantle.
4. Tšebeliso ea khatello, e ka fihlella ts'ebetso e iketsang. -
Likarolo tsa Thermal Grease
1. Karohano e tlase ea oli (ho ea ho 0).
2. Mofuta o tšoarellang nako e telele, o tšepahalang hantle.
3. Khanyetso e matla ea boemo ba leholimo (khanyetso ea mocheso o phahameng le o tlase -40~150 ℃).
4. Ho hanyetsa mongobo, ho hanyetsa ozone, ho hanyetsa botsofali.
